LOGO DIGITIZING
Multi Service Mech Contracting Two-Color Logo Digitizing at 9,692 Stitches
A two-color build has nowhere to hide a soft edge. Multi Service Mech Contracting’s stacked wordmark and cube-shaped equipment icon went through digitizing as a flat two-color file: black lettering and outline over a white base, 9,692 stitches across a 3.52″ by 2.51″ layout. With only two colors doing all the work, letter spacing, satin column width and icon fill density all had to hold with nothing else on the design to distract from a mistake.
01 · Artwork receivedTwo-line wordmark over a cube-shaped equipment icon with grille lines and fan-blade detail. 02 · Digitized file previewRendered preview showing the flat satin lettering and fill icon before a single stitch runs. 03 · Production worksheetWilcom EmbroideryStudio, Level 3 Advanced: 9,692 stitches, 2 colors, 3.52″ × 2.51″. 04 · Production runHooped and running on a commercial embroidery machine, color change intact between lettering and icon.
Two colors, no room to hide a rough edge
A two-color build puts every decision in plain view. There is no third shade to soften a satin column that runs too wide or a fill that reads muddy at three and a half inches across. The wordmark stacks two lines of condensed lettering over a cube-shaped equipment icon with grille lines and rounded fan-blade detail on top, all carried in black and white thread against the base fabric. Letter height, satin width and icon fill density all had to hold at that size, or the design blurs into a black block the moment it hits the machine.
Build order set to protect the small lettering
The file stitches the wordmark first, while hoop tension is most even, then moves to the icon so the grille lines and fan shapes land inside a stable field instead of fighting distortion from an already-dense lettering block underneath. That order keeps each color’s entry and exit points tucked behind the icon’s outline rather than sitting in open space on the wordmark, where a stray tail thread would be the first thing anyone noticed.
One color change, density carrying the icon
Two colors means a single color change carries the whole build, so there was no room to correct for a wrong density call mid-file. The icon’s grille slats run as narrow fill columns rather than satin, since satin at that width would have bridged the gaps between bars into one solid shape. Underlay under the fill holds the fabric flat so the slats stay separated instead of pulling together once the hoop comes off the machine.
Specs
- Techniques
- Flat two-color digitizing
- Finished size
- 3.52″ × 2.51″
- Stitch count
- 9,692
- Colors
- 2
- Color changes
- 1
- Software
- Wilcom EmbroideryStudio, Level 3 Advanced
- Pricing tier
- Standard ($15)
- Turnaround band
- Rush (1–2 hour)
- Digitized by
- Dustin Smith
The full worksheet
Every number above traces back to this one production sheet: stitch count, color count and finished size Wilcom EmbroideryStudio generated for the two-color build.
